SKB-1808 Product Specification

Post Reply
admin
Site Admin
Posts: 265
Joined: Mon Mar 16, 2020 9:11 am
Location: https://t.me/pump_upp
Has thanked: 23 times
Been thanked: 8 times
Contact:

1.jpg
1.jpg (137.82 KiB) Viewed 3010 times
Product Specifications:
1. Working voltage 12V
2. Working current ≦4A
3. Standby current ≦30mA
4. Battery capacity: no built-in battery
5. Use time no timing
6. Output power 48W
7. Function description:
8: Power key: Long press 3S to switch on and off, short press to switch between 3 modes after booting: 1. Single-shot mode (press the trigger button once, the light will flash once, with cooling) 2. Burst mode (press the trigger button once Just automatic flashing, with refrigeration) 3. Refrigeration (without flashing
9. + key: Flash enhancement adjustment, 5 levels of intensity can be adjusted.
10. - button: flash reduction adjustment, 5 levels of intensity can be adjusted.
11. Two-in-one hair removal and skin rejuvenation
12. With freezing point function
13. Equipped with three replaceable nursing heads
14, 5 gears to adjust the intensity
15. Manual + automatic mode
16. Inductive breathing light bar
17. LED display
2.jpg
2.jpg (36.47 KiB) Viewed 3010 times
Is there anything I should be aware of?
Trigger button: After the metal head touches the skin and the blue light is always on, press the trigger button for single or continuous flashes. When the blue indicator light flashes like a marquee, it means that the metal head is not in contact with the skin, or the capacitor is charging
3.jpg
3.jpg (80.55 KiB) Viewed 3010 times
Do not use it for:
.Tattoos or pigmented areas, including moles.
. Close to the eyes (although the upper lip is thin).
. In the genital area (but can safely target the bikini line).
4.jpg
4.jpg (56.49 KiB) Viewed 3010 times
Post Reply