Instructions for use of hair removal device
Posted: Thu Oct 14, 2021 10:11 am
- 1.png (78.47 KiB) Viewed 11403 times
1. before use, please shave off the hair on the area that needs epilating，wipe clean the surface, remove the IPL epilator and other accessories from the box, plug the power cord into the laser epilator, plug the adapter into the power socket, the LCD screen will display "OFF" orange light long.
2. long press power button for 2seconds to power start the device, the green bright long light will appear and the machine internal fan will start working, LCD display light number and intensity gear. Short press power key to adjust suitable skin lighting gear, the darker the skin color the lower the gear, gear 1 is recommended for first use.
3. put on the product eye protection goggles, place the device on the skin at 90 degrees, so that the light outlet is completely close to the skin, at this time the light is in the green flashing state.
4. At the manual hair removal mode，press the flash button，this mode is suitable forunderarms， bikini line small areas. You should be able to feel the warmth of the flash.
5. long press the flash button for 2seconds to switch to automatic hair removal mode, as long as the flash mouth is close to the skin it will flash automatically, about 2 seconds between each flash interval, suitable for large areas such as leg, arm, etc.
6. in order to ensure that all parts can be handled, please try to flash closely to the previous part. Note, however, that it is best to remove hair only once in the same area. Continuousepilation of more than two times in the same area does not improve the effect of the course of treatment but will increase the risk of adverse skin reactions.
7. After treatment, press and hold the power button for 2seconds to shut down the device, remove the power adapter from the power socket, and finally separate the host and power adapter.
Note: Wear goggles when using this product to effectively protect against the damage that IPL pulsed light may cause to the eyes, and use it in well-lit rooms to reduce the glare caused by flash to the eyes.
- 2.png (39.06 KiB) Viewed 11403 times